Suko-T – 3-Phase Single Hopper Loader

suko
freccia

Single vacuum hopper loaders suitable for medium rate pneumatic conveying of low-dust pellets.

MORE INFORMATION
  • Easy to use, no adjustment is required.
  • Compact even under high conveying capacity.
  • Flashing alarm lamp.
  • Microprocessor based control.
  • When the vacuum receiver is empty, the discharge flapper valve closes and establishes electrical contact which, in turn, starts-up automatic filter cleaning and the vacuum motor
  • The vacuum in the receiver brings the discharge flapper valve back to a fully closed position and causes the suction of material into the receiver where it settles on the bottom
  • The exhaust air passes through the filter, which retains dust and fine particles, and proceeds towards the pump to be discharged into the environment
  • When the material reaches the volume-fill sensor, the system switches off the vacuum pump.
  • The weight of material in the receiver causes the discharge flapper valve to open and the material drops into the machine hopper.
  • If the receiver is not completely emptied, the material prevents the flapper valve from closing and the system goes into stand-by. A new cycle cannot be started-up until it is completely empty
sez_sukot_extru_tram_ric
  • Vacuum receiver installed directly onto the hopper to be fed
sez_sukoT_carrello
  • Floor vacuum unit.
ricevitore
  • Receiver.
pompa_pic
  • Vacuum unit.
tubi
  • Piping.
sonde
  • Suction nozzle.
FacebookTwitterLinkedInGoogle+Share